Hanscoat® Automotive Anti-Corrosive Epoxy Primer is a professional grade 2-component epoxy primer that exhibits superior anti-corrosion properties. It is an ideal undercoat for automotive refinishings and bare substrates.
☑2-Component Epoxy Primer System
☑Long Term Protection Against Abrasion and Rusting
☑Superior Durability and Adhesion
☑Excellent Resistance to Acids and Chemicals
☑Outstanding Anti-Corrosive Properties
☑Lead-Free
Specifications
Principal Uses: As a heavy duty primer for bare substrates
Sheen: Flat
Coverage: 20-25 square meter per gallon / coat
Surface Dry: 2 – 3 hours
Recoat Interval: 6 – 8 hours
Dry Through: Overnight
Thinning: Reduce 1:1 with A-Plus® PG Epoxy Reducer
Clean-up Solvent: A-Plus® PG Epoxy Reducer
Application: Spray
Packaging: 1L, 4L
Mixing Ratio: 3:1 Paint and Catalyst, respectively
Surface Preparation & Precautions
- Surface to be painted must be free from contaminants like dirt, grease, and other foreign matters.
- For Damaged Surfaces: Sand thoroughly and wipe dry with cleaning solvent prior to application of primers. If necessary, strip off old paint using A-Plus Supertanggal® Paint Remover.
- For Bare Metal: Prime using either Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as an undercoat.
- Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
- Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between undercoat, putty, and basecoat. Allow 15 mins flash-off time between each coat.
- Observe 3-5 hours full drying time for all primers, putties, and fillers before application of colors and topcoats.
Painting Procedure
- Undercoat Primer: Apply at least 2 coats of Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as undercoat.
- Putty: Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
- Primer Surfacer: Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between the undercoat, putty, and the basecoat. Allow 15 minutes flash-off time between each coat.
- Basecoat: Choose desired color from Hanscoat® Automotive Pure Acrylic Paint as basecoat. Apply 2-3 full basecoats.
- Topcoat: Finish with 2-3 full coats of Hanscoat® Automotive Pure Acrylic Topcoat Clear or Hanscoat® 2K Polyurethane Topcoat Clear.
- Allow 10-15 mins flash-off time between each coat. Bake at 60°C for 30 mins or air dry for at least 6-8 hours (Pure Acrylic System) and 18-24 hours (2K Polyurethane System)
Related products
Automotive
Automotive