Glazer® Automotive Lacquer Paint

Glazer® Automotive Lacquer is a solvent-based nitrocellulose lacquer type paint made from the finest quality coco-alkyd resin and carefully selected pigments to give maximum performance in terms of durability, adhesion, and protection. It is easy to apply and dries rapidly to a high gloss, long-wearing attractive finish ideal for a wide variety of substrates like wood, household furniture, handicrafts, appliances, toys, industrial structures, tools and equipment.

☑Excellent Durability and Adhesion
☑High Gloss Duco Finish
☑Easy to Apply, Fast-Drying
☑Protects Against Abrasion and Scratches
☑Ideal for Wooden Furnitures
☑Lead-Free

Category: Industrial Tag: Nitrocellulose Lacquer Based Coatings

Specifications

Principal Uses:Interior/Exterior: Wood surfaces such as doors, doorjambs, cabinets, and shelves. Can also be used on properly primed metal surfaces.

Sheen: Gloss

Coverage: 25-30 square meter per gallon / coat

Surface Dry: 10-15 mins

Recoat Interval: 30 mins to 1 hr

Dry Through: 1 hr

Thinning: Up to 20% by volume A-Plus® PG Lacquer Thinner

Clean-up Solvent: A-Plus® PG Lacquer Thinner

Application: Brush/Roller/Spray

Packaging: 1L, 4L

*Available in 20 factory mixed colors

*Also available in: Clear, Flat Clear, White, Black, Topcoat Clear, Water White Clear

Surface Preparation and Precautions

For Wooden Surfaces:

Ensure wood material is fully kiln dried/treated.
If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover. If necessary, remove wood discoloration by applying A-Plus® Wood Bleach #1 & #2.
Sand surface smooth (#220/#440) to eliminate surface imperfections. For minor surface irregularities, patch up using Glazer® Auto Lacquer Putty. For major surface imperfections, use A-Plus Polytite® Polyester Body Filler.
Surface to be applied on must be thoroughly cleaned, free of any contaminants that may affect adhesion such as wax, oil, grease, moisture, and loose particles.
Avoid painting under extreme environmental conditions and/or bad weather conditions.

Painting Procedure

Painting Procedure on Wooden Substrates(Duco Finish):

Primer: Apply at least 2 coats of Glazer® Auto Lacquer Primer. Sand lightly(#220/#440) before topcoat application. Allow at least 1 hr drying before correcting surface imperfections.
Putty: Fix major surface imperfections using A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, apply Glazer® Auto Lacquer Putty. Sand (#150) smooth before applying another coat of primer.
Primer: Spot prime using Glazer® Auto Lacquer Primer on areas where putty is applied.
Final coat: Apply at least 2 coats of Glazer® Auto Lacquer Topcoat color of choice.
Optional: For higher gloss, apply at least 2 coats of Glazer® Auto Lacquer Topcoat Clear.

Repainting:

Strip off old paint using A-Plus Supertanggal® Paint Remover. If old lacquer finish is in good condition, sand surface.
Make sure surface is clean and dry before applying Glazer® Auto Lacquer Primer.
Apply at least 2 coats of Glazer® Auto Lacquer Topcoat color of choice.
Optional: For higher gloss, apply at least 2 coats of Glazer® Auto Lacquer Topcoat Clear.

(Note: 10% by volume of A-Plus® PG Lacquer Flo is added to the varnish mixture just before application to prevent moisture blushing)

Color Swatches

6250

CHROME YELLOW LIGHT
6255

LEMON YELLOW
6252

CHROME YELLOW MEDIUM
6296

CATERPILLAR YELLOW
6297

YELLOW OXIDE

6105

WHITE
6370

MOLY ORANGE
6372

FIRE RED
6375

INTERNATIONAL RED
6350

MAROON

6710

METALLIC FINE
6715

METALLIC COARSE
6622

TAHITI BLUE
6620

THALO BLUE
6520

THALO GREEN