A-Plus Sea Master® Marine Enamel is a redesigned alkyd type marine paint having superior durability and resistance against splashes of salt-water and exposure to sunlight. It is the economical choice of paint specially formulated for the demanding and harsh conditions experienced by vessels and structures in frequent contact with seawater. It is highly suitable for painting interior and exterior parts of the vessel not submerged in water.
☑Superior Durability and Adhesion
☑Good Resistance to Seawater, Chemicals, and Oils
☑High Gloss and Build Marine Coating
☑Protection Against Abrasion and Rusting
☑Easy to Use, Lead-Free
☑Available in 15 Factory-Mixed Colors
Specifications
Principal Uses: Exterior/Interior: Vessels, Main Decks, Railings, Hulls, Masts and topside surfaces of ships and structures made of aluminum, steel, wood, and fiberglass that are above the water line.
Sheen: Gloss
Coverage: 25-30 sqm per gallon / coat
Surface Dry: 6 – 8 hrs
Recoat Interval: 1 day
Dry Through: Cures overnight. Full strength at 3 days
Thinning: A-Plus® Enamel Reducer
Clean-up Solvent: A-Plus® Enamel Reducer
Application: Brush, Roller, Spray
Packaging: 1L, 4L
*Also available in Black, White
Surface Preparation & Precautions
- Surface to be painted must be thoroughly cleaned, free from any contaminants that can affect adhesion such as wax, oil, grease, rust, and loose particles.
- If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
- Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to painting.
- Use a mechanical grinder to sand and matt steel surfaces. For aluminum and fiberglass, use #80 grit sandpaper. For wood surfaces, use #80-150 grit sandpaper.
- Avoid painting under extreme environmental conditions and/ or bad weather conditions.
- MIX WELL before using.
Painting Procedure
- Primer: Observe proper surface preparation. Mix product well before applying at least 2 coats of A-Plus Sea Master® Marine Anti-Corrosive Epoxy Primer using either a brush, roller, or spray. Allow at least 6-8 hours drying time before recoat.
- Putty: Patch up minor surface imperfections with fully mixed components of A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive. Sand lightly before proceeding with topcoat.
- Topcoat: Apply at least 2 coats of A-Plus Sea Master® Marine Enamel using either a brush, roller, or spray.
Color Swatches
-
9615
WHITE -
9622
EL NIDO BEIGE -
9625
PALAUI YELLOW -
9642
BORA RED -
9628
CAMGUIN YELLOW -
9645
CARAMOAN RED -
9631
SIARGAO ORANGE -
9662
CORON BLUE -
9665
OSLOB BLUE -
9668
MISIBIS BLUE -
9652
PANGLAO GREEN -
9656
BOLINAO GREEN -
9658
SUMILON GREEN -
9685
SUBIC GRAY -
9688
SAMAL GRAY
