A-Plus Procrete® Low Visco Construction Epoxy is a thermosetting heavy-duty construction epoxy used for anchoring, bonding, caulking, grouting, repairing degraded concrete, and other types of construction works where superior bonding is required. Due to its low viscosity and self-leveling properties, it covers larger areas and has easy workability. It exhibits superior adhesion and cures to a very strong material resistant to water, chemical spills, temperature extremes, and mechanical abuse.
☑100% Solids, Self-Levelling Construction Epoxy
☑Cures to a Very Tough, Hard, and Durable Bonding Material
☑Cures Even in Damp Conditions
☑Superior Adhesion and Crack Resistance
☑Does Not Shrink
☑Flowable and Easy-To-Apply
Specifications
Principal Uses:
☑Bonding aid for new concrete to old/degraded concrete, wood, properly primed metal surfaces, and most construction materials
☑ Bonding wood and metal to concrete substrates
☑Installing ceramics or glass tiles to
wooden or concrete surfaces
☑As concrete floor coating and/or sealer
☑Patching spalled and damaged areas on concrete structures
☑As tile adhesive and grout for regular tiles as well as natural stones like marble and granite
Coverage: Approx. 7,500cc
Surface Dry: 4 – 6 hrs
Dry Through: Cures overnight. Abrasion resistance against foot traffic and mechanical works fully develops after three (3) days of curing.
Thinning: Use as supplied. If necessary, thin with A-Plus® PG Epoxy Reducer
Clean-up Solvent: A-Plus® PG Epoxy Reducer
Application: Putty Knife/Spatula
Packaging: 250mL, 1L, 4L
Pot life: 1-2 hours
Compressive Strength(ASTM D695): 9,000psi
Surface Preparation & Precautions
- Surface must be thoroughly cleaned, free from any contaminants that may affect adhesion such as wax, oil, grease, rust, and loose particles.
- Strip off loose and flaking old paint using either a spatula or putty knife. Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to application.
- MIX WELL before using. Mixing ratio: 1:1 by volume, Component A and Component B. Potlife of mixed components is around 1-2 hours. Use different spatulas to avoid contamination. Do not put mixed components back into its original container.
- Keep away from reach of children. Avoid breathing vapor, use with adequate ventilation.
- Avoid prolonged contact with skin. Wash hands thoroughly after handling, before eating or smoking.
- All solvent-based and oil-based paints and putties are Flammable!
Painting Procedure
- Ensure proper surface preparation. To avoid wastes, mix just enough material for application within the indicated pot life.
- Mix A-Plus Procrete® Low Visco Construction Epoxy Part A (1 part) with Part B (1 part) thoroughly for 5 minutes. Make sure both components are mixed homogeneously.
- For concrete repair, wet old substrate with damp water before applying epoxy mixture. Apply liberally using either a brush or roller on the old concrete substrate.
- For jointing substrates, apply mixed material with a putty knife or spatula on the areas or surfaces to be joint. Press and secure firmly to ensure complete contact. Allow to cure before doing other construction works.
- Pot life is around 1-2 hours. Allow 72 hours curing to achieve maximum strength. Scrape off excess material while in its uncured state.
Cleanup: Tools and/or equipment used during application should be cleaned immediately before the mixture cures. Use A-Plus® PG Epoxy Reducer or ordinary paint thinner as cleaning solvents. For soiled hands, wipe with cloth dampened with solvents followed by washing with soap and water.
Related products
Construction Chemicals
Construction Chemicals
Construction Chemicals
Construction Chemicals
Construction Chemicals
A-Plus Concrete Solution® Type-E Water Reducing & Fast Setting Cement Admix
Construction Chemicals
Construction Chemicals
Construction Chemicals