A-Plus Polytite® Polyester Body Filler

A-Plus Polytite® Polyester Body Filler is a 2-component high strength and fast-drying polyester body filler applicable to a wide range of substrates such as concrete, wood, metal, and fiber glass. Once mixed with the hardener, A-Plus® Polytite Body Filler immediately cures to a strong, durable, flexible, and highly sandable finish with excellent adhesion.

☑Professional Grade Formula
☑Superior Strength & Flexibility
☑Abrasion and Impact Resistant
☑For Wet and Dry Sanding
☑Easy Mixing and Sanding for Fast Repair
☑Smooth and Fine Finish

Categories: Construction Chemicals, Wall and Surface Preparation

Specifications

Principal Uses: Ideal for correcting surface imperfections such as cracks, crevices, holes, and dents, prior to painting.

Surface Dry: 3 – 5 minutes

Dry Through: 20 – 30 minutes

Thinning: Used as supplied

Clean-up Solvent: A-Plus® PG Lacquer Thinner

Application: Putty Knife, Spatula, Trowel

Packaging: 1L, 4L

Surface Preparation & Precautions

Surface Preparation:

1. Surface to be painted must be thoroughly cleaned, free from any contaminants that can affect adhesion such as wax, oil, grease, rust, and loose particles.
2. Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to painting.
3. Avoid applying under extreme environmental conditions and/ or bad weather conditions.
4. MIX WELL before using. Do not put mixed filler and hardener back in can.

Painting Procedure

Important reminders for optimum product performance:

1. Surface must be thoroughly clean and dry, free from dust, dirt, oil, and other contaminants.
2. Pot life when mixed with hardener is approximately below 3 minutes.
3. Mix well before using.

Mixing and Application:

1. Place required amount of A-Plus Polytite® Polyester Body Filler on a clean and dry mixing surface.
2. Mix 1 part hardener to 60 parts A-Plus Polytite® Polyester Body Filler using a putty knife until a uniform colored paste is achieved.
3. Apply using a putty knife to firmly spread body filler on the substrate prepared. After application, allow 20-30 minutes curing before sanding(#80/#180) and painting.

Clean-up:

Use A-Plus® PG Lacquer Thinner for cleaning up used tools.