A-Plus PolySupreme® 2K Water-Based Heavy-Duty Polyurethane Floor Varnish

A-Plus PolySupreme® 2K Water-Based Heavy-Duty Polyurethane Floor Varnish is a two component waterborne varnish that is formulated for use on high foot traffic residential and commercial floor parquets. It exhibits an extra durable, mar and abrasion resistant, non-yellowing, glossy film. It has completely zero-odor and virtually no VOC while having the same durability and UV resistance properties of its solvent-based counterpart which makes it the ideal choice of paint for wooden furniture, doors, parquet flooring, and many more.

☑Premium 2-Component Water-Based Polyurethane Floor Varnish
☑Easy-to-Apply, Fast Drying, Non-Yellowing
☑Foot Trafficable, Ideal for Wooden Floor Parquet
☑Excellent Resistance to Abrasion, UV and Weathering
☑Low VOC, Environmental Friendly

Categories: Floor Coatings, Woodcraft

Specifications

Principal Uses: Ideal for wooden parquet floors, doors, countertops, planks, household furniture, and many more.

Sheen: Gloss

Coverage: 30-35sqm per gallon / coat

Surface Dry: 30 mins

Recoat Interval: 1 hr

Dry Through: Overnight curing time for light traffic. 3-7 days to achieve full strength.

Thinning: Water

Application: Brush, Roller, Spray

Packaging: 1L, 4L

Available in: Matte, Silk-matte, and Gloss

Surface Preparation & Precautions

Ensure wooden substrate is fully kiln dried/treated.
Remove old and loose paint by scraping and sanding, if necessary, use A-Plus Supertanggal® Paint Remover. To remove any wood discoloration, apply A-Plus® Wood Bleach #1 & #2.
Countersink nail heads before applying putty. Patch up surface imperfections with A-Plus® Fast-Drying Plastic Wood Filler.
Sand substrate using #120-240 grit sand paper followed by #400 grit sand paper for the final sanding. Vacuum substrate thoroughly before wiping with a dry cloth.
Surface to be painted must be clean and dry, free from dirt, oil, and other contaminants.

Painting Procedure

New Painting for Wooden Floors/Furniture:

Jointing/Putty: For jointing and filling gaps between planks, use A-Plus® Wood Glue and A-Plus® Fast-Drying Plastic Wood Filler.
Primer: Apply at least 2 coats of A-Plus PolyClassic® 1k Water-Based Polyurethane Wood Sealer as primer. Allow each coat to dry for an hour before sanding.
Topcoat: Mix A and B thoroughly. Apply at least 2 or more coats of A-Plus PolySupreme® 2K Water-Based Heavy-Duty Polyurethane Floor Varnish using a spray gun.
Allow overnight curing time for areas with light traffic and at least 3 days for normal to heavy traffic areas.

Repainting Previously Coated Wooden Floors/Furniture:

Ensure surface is free from wax, dirt, and oily residues. If previously painted, strip off all paint to bare substrate with A-Plus Supertanggal® Paint Remover. To remove wood discoloration, apply A-Plus® Wood Bleach #1 & #2.
Prepare a sample or test area. Make sure test area is clean and sand it thoroughly before applying A-Plus PolySupreme® 2K Water-Based Heavy-Duty Polyurethane Floor Varnish.
After 24 hours, scratch the surface with a coin. If there is poor adhesion after 3 days, then the surface cannot be overcoated.
After ensuring that the floor is in order with good adhesion, clean the surface well and proceed to coat the whole surface.

IMPORTANT REMINDERS

Mix well before using.
Do not use A-Plus PolySupreme® 2K Water-Based Heavy-Duty Polyurethane Floor Varnish over alkyd-based wood fillers, alkyd-based wood stains, and some latex paints.
Tannin naturally appears on some wood species. Resulting finishes may vary depending on wood types.
For airless spray, it is recommended to use 0.015-0.019 tip at 2000psi then adjust pressure as needed.
Always seek professional help when in doubt.