A-Plus Impregnator® Sealer is a nanoparticulate penetrating water repellent sealer used for general sealing of porous mineral substrates like masonry, stones, and other similar materials. Its unique formulation of silane, siloxane, and synthetic polymers allows it to chemically bond and penetrate the substrate to form an invisible barrier resistant to water, moisture, algae growth, and stains. It maintains/preserves the natural look of the substrate while allowing vapors or moisture to escape.
☑Interior/Exterior Use
☑Ready-To-Use, Easy Application
☑Performs Well on Both Neutral and Alkaline Substrates
☑Superior Water Repellency
☑Protects and Maintains Natural Surface Appearance
☑Chemically Bonds and Deeply Penetrates Pores
☑Creates Water Beading Effect
Specifications
Principal Uses: Used for sealing porous substrates like natural and artificial deco stones, precast concrete and masonry, bricks, stucco, cement fiberboards, and many more.
Sheen: N/A
Coverage:30-40 sqm per gallon / coat depending on surface porosity
Surface Dry: 30 mins
Dry Through: 1 hr
Thinning: Use as supplied
Application: Brush or Spray
Packaging: 4L
Surface Preparation & Precautions
Precautions:
- Do not use acid etching products on areas or surfaces to be treated.
- Product must be applied directly to bare mineral substrates only.
- Do not apply on direct sunlight or on extreme weather conditions.
- Reactions or water beading effect differ from substrate to substrate.
- This product willl not hide cracks, blemishes, and other surface imperfections.
Surface Preparation:
- Wash and remove residues that could inhibit contact between the product and the mineral surface. If necessary, perform power washing or intense scrubbing.
- Surface to be treated must be dry, sound, and firm, free from dust, dirt, laitance, oil, waxes, and other contaminants.
Painting Procedure
- Using either a brush, roller, or spray, apply liberal amounts of A-Plus Impregnator® Sealer on the porous substrate until wet.
- If surface is very porous, apply another treatment after 1 hour.
- Allow surface to fully dry at least 6 hours before subjecting to normal use or before testing its water repellant property.
Related products
Construction Chemicals
Construction Chemicals
Construction Chemicals
Construction Chemicals
Construction Chemicals
A-Plus Concrete Solution® Intergral Waterproofing Cement Admix
Construction Chemicals
A-Plus Concrete Solution® Type-E Water Reducing & Fast Setting Cement Admix
Construction Chemicals
Construction Chemicals