A-Plus PolyWood® Hi-Performance 2K Polyurethane Floor Varnish is a two-component aromatic Polyurethane finish designed specially for wooden surfaces such as indoor wooden countertops and parquet flooring. It cures to a clear, tough, non-slip, mar resistant glossy film that is resistant to abrasion, chemicals, and UV exposure.
☑Premium Grade 2-Component Polyurethane Floor Varnish
☑Foot Trafficable, Non-Slip, Mar Resistant Clear Glossy Film
☑Non-Yellowing, UV Resistant
☑Formulated Using High Grade Resins that can Withstand Sunlight and Weather Conditions
☑Ideal for Wooden Floor Parquets, Doors, Furnitures, and many more!
Specifications
Principal Uses: Used for high traffic wooden floorings, planks, doors, countertops, and other household woodcraft
Sheen: Gloss
Coverage:
18-20 sqm per gallon /coat as sealer
20-25 sqm per gallon / coat as topcoat
Surface Dry: 30 mins – 1 hr
Recoat Interval: 1 – 2 hrs
Dry Through:
Overnight curing time for light traffic
3-7 days to achieve full strength
Thinning: A-Plus PolyWood® 2K Polyurethane Reducer at 30% by total volume when spraying to improve film build
Application: Brush/Spray
Packaging: 1L, 4L
Surface Preparation & Precautions
- Ensure wooden substrate is fully kiln dried/treated. Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter.
- To remove any wood discoloration, apply A-Plus® Wood Bleach #1 & #2. If previously coated, remove old and loose paint by stripping off with A-Plus Supertanggal® Paint Remover.
- Sand surface smooth using #180 grit sandpaper or use a planetary grinder.
- Correct surface imperfections by using A-Plus® Fast-Drying Plastic Wood Filler.
- Vacuum surface clean and wipe with A-Plus® PG Lacquer Thinner prior to application of sealer.
Precautions:
- Use paint only on 65-95% relative humidity environment conditions for better performance.
- MIXING RATIO for both sealer and topcoat is 3:1 paint and catalyst, respectively.
- Mix contents well before using. Use at package viscosity. Allow at least 3 minutes induction period prior to application.
- Apply brush using single long strokes to achieve better uniformity and prevent micro bubbles.
Painting Procedure
For Wooden Parquet:
- Putty: A-Plus® Fast-Drying Plastic Wood Filler. Sanded lightly before topcoat application.
- Primer: Apply at least 2 coats of A-Plus PolyWood® Hi-Performance 2K Polyurethane Wood Sealer. Mixing ratio is 3:1 by volume sealer and catalyst, respectively. Allow at least 1 hour drying, followed by light sanding (#220) in between each coat.
- Topcoat: Apply at least 2 coats by mixing A-Plus PolyWood® Hi-Performance 2K Polyurethane Floor Varnish with catalyst at 3:1 ratio by volume using either a Brush or Spray. Allow at least 1 hour drying and light sanding (#400) in between.
- If necessary, thin with A-Plus PolyWood® 2k Polyurethane Reducer at 30% by total volume when spraying to improve film build.
Related products
Woodcraft
Miscellaneous Products
Automotive
Miscellaneous Products
Woodcraft
Woodcraft