A-Plus Fresh&Green® Odor-less Anti-Bacterial Paint

On Concrete Surfaces:

1. Waterproofing(Optional): For positive side waterproofing on areas such as Firewalls, Bathroom, Roofdecks, Basements, etc., apply 3-4 coats of a mixture of A-Plus® Concrete Bond with portland cement at 1-Ltr to 1-Kg ratio. Pot life is approx 4 hours. Allow 2-3 hours drying between each coat. For superior waterproofing on both positive and negative side water pressure, apply 2-3 coats of A-Plus Water-Check®.
2. Sealer: Observe proper concrete curing schedule. If previously painted, strip-off all loose and chalking paint. Sand with large grit sandpaper to roughen old paint surface. If painting new concrete or if efflorescence is present, apply A-Plus® Concrete Sealer.
3. Primer: Apply at least 1 coat of A-Plus® Premium Acrylic Flat Latex as primer.
4. Putty: Repair all minor cracks and surface imperfections with A-Plus® Concrete Putty. For a luxuriously smooth finish, apply A-Plus® Skim Coat 501/503.
5. Topcoat: Apply 2-3 coats of your choice color of A-Plus Fresh & Green® Paint. Allow 2-3 hours drying time between each coat.

On Wooden Surfaces:

1. Clean surface thoroughly. If previously painted, strip–off all poorly adhered paint. Sand with large grit sandpaper to improve adhesion. (APPLY ONLY ON ROUGH WOOD SURFACES)
2. Primer: For a high quality smooth finish, Apply 1-2 coats of A-Plus® Premium Acrylic Latex or A-Plus Aqua Enamel® Wood Primer followed by A-Plus® Enamel Glazing Putty to cover all surface imperfections. Allow to cure overnight before applying topcoat.
3. Topcoat: Apply 2-3 coats A-Plus Fresh & Green® Paint using either a brush, roller, or spray. Allow 2-3 hours drying between each coat.

On Metal Surfaces:

1. Wipe surface clean with A-Plus® PG Lacquer Thinner then let dry. If rust is present, sand using A-Plus® Rust Converter.
2. Primer: Apply either Glazer Galva-Plus® Epoxy Primer or A-Plus® Metal Primer Red Oxide.
3. Topcoat: Apply 2-3 coats A-Plus Fresh & Green® Paint using either a brush, roller, or spray. Allow 2-3 hours drying between each coat.