A-Plus® Flatwall Enamel White is a smooth flat finish alkyd type paint that provides excellent durability and hiding power while being known for its fast drying properties. It is used as a primer for enamel coatings and topcoat paint for ceilings.
☑Premium Alkyd Enamel-Based Paint
☑Suitable for Interior and Exterior Use
☑Flat and High Build Coating
☑Superior Durability and Adhesion
☑Protection Against Abrasion and Rusting
☑Easy to Use, Lead-Free
Specifications
Principal Uses: Interior & Exterior Ceilings, Wood, and Furniture. Also used as a primer for A-Plus® Quick Drying Enamel Paint.
Sheen: Flat
Coverage: 25-30 sqm per gallon/coat
Surface Dry: 30 mins – 1 hr
Recoat Interval: 2 hrs
Dry Through: 6 – 8 hrs
Thinning: Maximum 1L A-Plus® PG Enamel Reducer per gallon paint
Application: Brush, Roller, Spray
Packaging: 1/4L, 1L, 4L, 16L cans
Surface Preparation & Precautions
- Surface to be painted must be clean and dry, free from dust, dirt and other foreign contaminants.
- Hammer nail holes and sand any surface defects with large grit sandpaper(#220/#400) for better adhesion.
- If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
- New galvanized surfaces must be wiped with paint thinner and sanded to improve paint adhesion. Non-galvanized or rusting metal surfaces should be treated and sanded clean with A-Plus® Rust Converter and pre-painted with at least 2 coats of a good anti-corrosive metal primer such as A-Plus® Metal Primer Red Oxide or Glazer Galva-Plus® Epoxy Primer.
Painting Procedure
For Wooden Surfaces:
1. Primer: Apply 1-2 coats of A-Plus® Flatwall Enamel White by using either brush or roller.
2. Putty: Fix any minor surface defects with A-Plus® Fast-Drying Plastic Wood Filler or A-Plus® Enamel Glazing Putty then sand.
3. Topcoat: Apply choice of topcoat paint using either A-Plus® Flatwall Enamel or A-Plus® Quick Drying Enamel.
For Metal Surfaces:
1. Primer: Apply at least 2 coats of A-Plus® Metal Primer Red Oxide or Glazer Galva-Plus® Epoxy Primer by using either brush or roller.
2. Topcoat: Apply 2 coats of A-Plus® Flatwall Enamel White using a brush or roller.
Related products
Woodcraft
Decorative
Decorative
Anti-Corrosive Paints
