A-Plus Elastoproof® Heavy-Duty Waterproofing Membrane is a premium ready to use Polyurethane-modified waterproofing membrane. It is foot-trafficable and cures fast to a seamless and monolithic waterproofing material that is tough, flexible, durable, abrasion and UV resistant. This product is ideal for roof decks, balconies, terraces, canopies, facades, firewalls as well as wet areas such as toilets, bathrooms, kitchens, and many more.
☑100% Heavy-Duty Positive Side Waterproofing
☑Flexible and Elastic, Foot Trafficable
☑No Need to Add Cement or Water
☑Resistant to Abrasion, Weathering and UV Exposure
☑Completely Seals Off Moisture and Water
☑Does Not Crack, Fade, or Debond
☑Low VOC, Environment Friendly
Specifications
Principal Uses: Roof decks, Balconies, Terraces, Canopies, Basements, Bathroom Floorings, Firewalls, Water Tanks, Gutters and Downspouts, and many more.
Coverage: 20-25 sqm per gallon / coat depending on the porosity of the surface
Surface Dry: 2 hrs
Recoat Interval: 2 – 3 hrs (Allow to dry for at least 1 day before painting)
Dry Through: Overnight curing. Maximum performance after 3-5 days.
Thinning: Use as supplied
Application: Brush/Roller
Packaging: 4L, 16L
Surface Preparation & Precautions
Precautions:
- Stir thoroughly before application. Ensure at least 5 mins mixing and induction time before using.
- Use product as supplied. No need to add cement, powder, or thinning solution.
- Pot life of mixed product is around 3-4hours. Close lid when not in use.
- Store in a cool dry place at room temperature.
Surface Preparation:
- Surface to be painted must be thoroughly cleaned, free of any contaminants.
- Structural defects that are within reach and repairable like leaks and all sources of internal water pressure must be addressed to prolong and ensure longevity of the membrane.
- Avoid application under extreme environmental conditions and/or bad weather conditions.
Application Procedure
- Ensure proper surface preparation by removing any oil and dirt by detergent cleaning.
- MIX PRODUCT THOROUGHLY BEFORE USING.
- Putty: Patch up surface imperfections using either A-Plus Procrete® Low Viscosity Construction Epoxy or A-Plus Procrete® High Viscosity Construction Epoxy.
- Waterproofing: Using either a brush or roller, apply 2-3 coats of A-Plus Elastoproof® Heavy-Duty Waterproofing Membrane. Allow at least 1-2 hours drying in between each coat. Applying direction for each coat must be perpendicular to the succeeding coats.
Related products
Waterproofing
Waterproofing