₱500.00 ₱450.00
A-Plus® 100% Premium Acrylic Latex is a water-based architectural paint with exceptional hiding power and durability. It is suitable for both interior and exterior concrete, wood, and primed metal surfaces. It is environment friendly, low-odor, non toxic, and does not contain any harmful heavy metals such as lead. It allows easy mixing as well as providing excellent adhesion and coverage thereby saving on cost and labor.
☑100% Premium Acrylic-based Latex Paint
☑Superior Hiding and Coverage
☑Enhances Adhesion and Paint Compatibility
☑Alkali-Resistant, Non-Flaking, Non-Chalking, Non-Cracking
☑Water-Based, Lead-Free, and Environment Friendly
☑Available in Flat, Semi-Gloss, and Gloss finishes
Specifications
Principal Uses: Interior and Exterior: Concrete Walls, Ceilings, Drywall Surfaces, Hollow Blocks, Brick Plaster, Primed Wood, Stucco, Gypsum and Ficem boards, and other similar construction materials
Sheen: Available in Flat, Semi-Gloss, and Gloss finishes
Coverage: 25-30 sqm per gallon/coat
Surface Dry: 30 mins
Recoat Interval: 1 hr
Dry Through: 2 hrs
Thinning: Use as supplied. If necessary, thin with not more than 125mL water per gallon paint.
Tinting: Mix with A-Plus® Acri-Tinting Colorants to achieve desired shades. Maximum of 1/4L colorant per 4L paint. Hansa Yellow and Toluidine Red are for interior use only.
Clean-up Solvent: Water
Application: Brush, Roller, Airless Spray
Packaging: 1L, 4L, 16L plastic containers
Also Available:
A-Plus® Clear Gloss Emulsion;
A-Plus® Undercoat Off-White;
A-Plus® Acrylic Textured Coating;
A-Plus® Latex Flat Tile Red;
A-Plus® Latex Flat Choco Brown;
A-Plus® Latex Gloss Tile Red;
A-Plus® Latex Gloss Choco Brown;
Surface Preparation & Precautions
Surface Preparation:
- Surface to be painted must be clean and dry, free from dust, dirt, and other foreign contaminants.
- Structural defects like leaks, and all sources of internal water pressure must be thoroughly repaired and sealed to prevent lifting, bulging, and other paint problems.
- Repair all minor non-structural cracks with A-Plus® Concrete Putty. For cracks of more than 2mm, chip-off the area around the crack, then PATCH-UP with a mixture of A-Plus® Plaster Bond and portland cement at 1-Ltr to 3-Kg ratio respectively. Allow to dry before painting. For concrete walls with multiple cracks over a large area, apply new plaster modified with A-Plus® Plaster Bond. Refer to product label for detailed procedures.
- If previously painted, strip off all paint to bare substrate with A-Plus Supertanggal® Paint Remover.
For Concrete Surfaces:
- Allow concrete to fully cure for at least 1 month. Otherwise, apply at 1-2 coats of A-Plus® Concrete Sealer.
- For existing concrete, scrape off old paint to bare substrate. Light sand followed by dusting off dirt and other contaminants. Allow surface to be completely dry and moist-free before painting.
Waterproofing:
- For areas such as Firewalls, Bathroom, Roofdecks, Basements, etc., requiring positive side waterproofing, apply 3-4 coats of a mixture of A-Plus® Concrete Bond with portland cement at 1-Ltr to 1-Kg ratio. Pot life is approx 4 hours. Allow 2-3 hours drying between each coat. Let cure for 48 hours.
- For superior waterproofing on both positive and negative side water pressure, apply 2-3 coats of A-Plus Water-Check®.
Painting Procedure
For Concrete Surfaces:
Sealer: A-Plus® Concrete Sealer(for new concrete)
Waterproofing(Optional): A-Plus® Concrete Bond or A-Plus Water-Check®
Putty: A-Plus® Concrete Putty(Interior) or A-Plus Acmelux® Cast(Exterior)
Skimcoat(Optional): For a luxuriously smooth finish, use A-Plus® Skimcoat 501/503
Topcoat: A-Plus® Premium Acrylic Latex(any sheen and/or color)
For Wooden Surfaces:
Primer: A-Plus® Premium Acrylic Flat Latex 1701
Putty: A-Plus® Enamel Glazing Putty
Topcoat: A-Plus® Premium Acrylic Latex(any sheen and/or color)
Related products
Decorative
Waterproofing
Decorative
Decorative
Decorative
Decorative