A-Plus A&B® Crystal Clear Laminating Epoxy

A-Plus A&B® Crystal Clear Laminating Epoxy is a professional grade 2-component self-levelling pure epoxy resin that is mostly used for wood and marine works, rivertables, table countertops, as well as for flooring applications. It cures to a crystal clear glossy material that is extremely hard, durable, and resistant to abrasion, chemical spills, and UV exposure. It is formulated to have a fast curing time where prolonged workability is not required.

☑100% Solids, Superior Strength, Durability, and Hardness

☑Specialized Crystal Clear Laminating Epoxy

☑Achieve up to 9000psi Compressive Strength(ASTM D695)

☑Excellent Resistance to Water and Spillage of Chemicals and Oils

☑Easily Sandable and Spreadable, Up To 1/2″ Thick

☑Compatible with Metallic Pigments and Dyes

☑For Rivertables, Woodcraft, and other Marine Applications

Categories: Epoxy & Adhesives, Woodcraft

Specifications

Principal Uses: For use on tabletops, river tables, woodcraft, and other marine applications. Also used for wet lay-up of wood, fiber-reinforced composites such as aramid (kevlar), carbon, glass fibers, as well as other inorganic particulates.

Sheen: Gloss

Coverage: 7-10 sqm per gallon @ 400-600 micrometers thickness

Surface Dry: Touch Dry: 1 – 2 hrs

Full Cure: Within 6-8 hrs, full strength at 3 days

Thinning: Use as supplied

Clean Up: A-Plus® PG Epoxy Reducer

Mixing Ratio: 2:1, Resin to Hardener

Pot life: 45 – 60 mins

Compressive Strength(ASTM D695): 7,500 psi

Application: V-notched Trowel or V-notched Squeegee; Spiked Rollers (for releasing bubbles)

Packaging: 1L, 4L

Surface Preparation & Precautions

Safety Precautions:

Surface to be applied on must be thoroughly cleaned, free of any contaminants that can affect adhesion such as wax, oil, grease, moisture, and loose particles.
WARNING! Pot life of mixed Epoxy and Hardener is around 45mins at room temperature.
Clean up excess material with A-Plus® PG Epoxy Reducer while material has not cured.

For Concrete:

Ensure proper surface preparation by removing any oil and dirt by detergent cleaning.
Sand or use a mechanical floor grinder with large grit to roughen and level the surface, allowing the paint enhanced grip and adhesion.
Rinse the concrete thoroughly with water to wash away residues that could affect paint adhesion. Allow ample time for the concrete surface to dry.
To repair large concrete surface imperfections, use either of the following:

– A-Plus Procrete® Low Viscosity Construction Epoxy – used for patching medium-sized concrete imperfections covering a large area.
– A-Plus Procrete® High Viscosity Construction Epoxy – used for patching larger-sized concrete imperfections covering smaller areas.

For Wood:

Make sure wood material is fully kiln dried/treated. Surface must be clean, dry, and free from foreign contaminants.
Sand surface smooth to eliminate surface imperfections.
Tape or seal the edges of the material to avoid leaking of the epoxy material.

Application Procedure

Stir and shake both components separately before mixing together.
Slowly add the hardener to the resin and mix slowly and thoroughly for 5-10 minutes before application. For better mixing, transfer both components to a larger container. Mixing ratio: 2:1 by volume, Paint and Hardener
Pour and spread evenly using either a squeegee, brush, or spatula. Maximum thickness is around 1/2″.
Optional: Pearlescent Metallic Pigments or dyes can be added to the Part A prior to mixing with Part B to create striking designs.