A-Plus A&B® All Purpose Marine Epoxy Adhesive is a multi-purpose high-strength 2-component epoxy adhesive ideal for marine and industrial construction works and repair. It exhibits superior bonding properties on various materials such as concrete, metal, wood, fiberglass, ceramics and many more. It bonds and cures to a very strong material resistant to seawater, chemicals, weathering, and mechanical abuse. It will even adhere and cure over damp surfaces. A-Plus A&B® All Purpose Marine Epoxy Adhesive is sandable and can be used as a putty for correcting and smoothing out surface imperfections. Mix equal parts of component A and B thoroughly for optimum performance.
COLOR: Part A – Pink; Part B – Cream
☑100% Solids, Superior Strength, Durability, and Adhesion
☑General Purpose Epoxy Adhesive
☑Achieve up to 9000psi Compressive Strength(ASTM D695)
☑Excellent Resistance to Water, UV, and Spillage of Chemicals and Oils
☑Easily Spreadable and Sandable
☑Hardens, Toughens, and Improves Surface Against Mechanical Abuse and Impacts
Specifications
Principal Uses: For use in a variety of marine and industrial construction works and repair: adhesive & sealer for wood and panel joints, putty for wood and metal substrates, bonding similar and dissimilar substrates(ex. metal on concrete), and many more.
Surface Dry: 2 – 3 hrs
Dry Through: Cures in 3 hours. Full strength within 3 days
Coverage: Approximately 4sqm at 2mm thickness per gallon set
Thinning and Clean-Up: A-Plus® PG Epoxy Reducer
Application: Putty Knife/Spatula
Packaging: 250mL, 1L, 4L
Potlife: 1-2 hrs
Compressive Strength(ASTM D695): 9,000psi
Surface Preparation & Precautions
- Surface must be thoroughly cleaned, free from any contaminants that may affect adhesion such as wax, oil, grease, rust and loose particles.
- MIX WELL before using. Mixing ratio: 1:1 by volume, Component A and Component B.
- Keep away from reach of children.
- Avoid breathing vapor, use with adequate ventilation.
- Avoid prolonged contact with skin. Wash hands thoroughly after handling, before eating or smoking.
- All solvent-based and oil-based paints and putties are Flammable!
Application Procedure
- Mix equal parts of components A and B thoroughly until a uniform color is achieved. Mix just enough amount that can be used within the pot life period.
- Apply and spread the mixture over the prepared surface using a putty knife.
- Allow to cure for at least 3 hours before sanding and filling. If necessary, additional layers may be applied within 2-3 hours depending on surrounding conditions.
- Allow to cure for at least 3 days before subjecting to extreme conditions.
- Use A-Plus® PG Epoxy Reducer to clean up excess material from equipment used while material has not yet hardened.
Related products
Epoxy & Adhesives
Epoxy & Adhesives
Epoxy & Adhesives
Epoxy & Adhesives