A-Plus® Enamel Glazing Putty is an alkyd-type putty formulated for filling minor surface imperfections on enamel-painted wood.
Specifications
Principal Uses: For filling minor surface dents and imperfections on wood.
Coverage:
Full Putty – 10-12 square meter per gallon / coat
Spot Putty – 25 square meter per gallon / coat
Surface Dry: 4 hrs
Dry Through: Overnight
Thinning: Not recommended
Clean-up Solvent: A-Plus® PG Enamel Reducer
Application: Putty Knife/Spatula/Trowel
Packaging: 1L, 4L
Surface Preparation & Precautions
1. Surface to be painted must be thoroughly cleaned, free of any contaminants.
2. Hammer nail holes and sand any surface defects with large grit sandpaper for better adhesion.
3. Avoid painting under extreme environmental conditions and/or bad weather conditions.
4. Do not intermix with other paint systems to preserve optimum product properties.
5. MIX WELL before using.
Painting Procedure
For new painting:
1. Primer: Apply A-Plus® Flatwall Enamel by using either brush or roller.
2. Putty: Fix any surface defects with A-Plus® Enamel Glazing Putty then sand(#220/#440).
3. Apply at least 2 coats of any enamel topcoat of choice such as A-Plus® Flatwall Enamel or A-Plus® Quick Drying Enamel.
For repainting:
1. Scrape off loose paint or use A-Plus Supertanggal® Paint Remover.
2. Fix any surface defects with A-Plus® Enamel Glazing Putty then sand.
3. Apply at least 2 coats of any enamel topcoat of choice such as A-Plus® Flatwall Enamel or A-Plus® Quick Drying Enamel.
Related products
Wall and Surface Preparation
Miscellaneous Products
Miscellaneous Products
Decorative
Decorative
Miscellaneous Products
Decorative
Construction Chemicals