A-Plus Sea Master® Marine Boot Topping Paint is a marine paint formulated for use on marking the waterline/seawater level of marine boats and vessels. It offers superior resistance against salt-water and various chemicals like fuel and engine oil as well as having easy cleaning properties against grime build-up and attachment of marine organisms.
☑Superior Durability and Adhesion
☑Good Resistance to Seawater, Chemicals, and Oils
☑High Gloss and Build Marine Coating
☑Protection Against Abrasion and Rusting
☑Easy to Use, Lead-Free
Specifications
Principal Uses: For marking the waterline/seawater level of boats, ships, and vessels.
Sheen: Gloss
Coverage: 25-30 sqm per gallon / coat
Surface Dry: 6–8 hrs
Recoat Interval: 1 day
Dry Through: Cures Overnight. Full strength at 3 days
Thinning: A-Plus® Enamel Reducer
Clean-up Solvent: A-Plus® Enamel Reducer
Application: Brush, Roller, Spray
Packaging: 1L, 4L
*Available in Red, Black
Surface Preparation & Precautions
- Surface to be painted must be thoroughly cleaned, free from any contaminants that can affect adhesion such as wax, oil, grease, rust, and loose particles.
- Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to painting.
- If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
- Avoid painting under extreme environmental conditions and/ or bad weather conditions.
- MIX WELL before using.
Painting Procedure
- Primer: Observe proper surface preparation. Mix product well before applying at least 2 coats of A-Plus Sea Master® Marine Anti-Corrosive Epoxy Primer using either a brush, roller, or spray. Allow at least 8 hours drying time before recoat.
- Putty: Patch up minor surface imperfections with fully mixed components of A-Plus A&B® Heavy-Duty Marine Epoxy Adhesive. Sand lightly before proceeding with topcoat.
- Topcoat: Apply at least 2 coats of A-Plus Sea Master® Marine Boot Topping Paint using either a brush, roller, or spray. Mix well before using.
Color Swatches
-
9606
RED -
9608
BLACK
